Ergonomic AK/SKS Sight Tool

• An Essential Tool to Make Fine Windage and Elevation Adjustments to the Front Sight of your SKS, AK, MAK and SLR95 Types Rifles
• Completely New Design to Achieve Most Stabilized and Controlled Adjustment
• Ergonomic Grip Comfort and Higher Strength

* SBM-47 Stabilizing Brace by SB Tactical

* The skeleton design is thinner and lighter than the original SBM47 brace with a nicer look and feel.

* Installs easily, just loosen the pistol grip screw, slide under grip and tighten grip screw

* For all PAP, C39, Draco, and AK Pistol Variants.

* The SBM47 Brace secures the Krinkov AK style pistols to the shooters forearm and assists them in firing.

* This is not a stock so you do not need a NFA Tax Stamp

* Box includes Stabilizer Brace, instruction manual, ATF Compliance letter, stabilizing velcro strap.

* Made in USA.

* Pistol Not Included.

• Encourages and Promotes Hand Placement Memory for Most Ideal Shooting Posture

• Ergonomic Contour for Absolute Weapon Control

• Protects Against Accidental Grabbing of Hot Barrel, Gas Block, Muzzle, or Front Sight

• Also Includes One Low Profile Lightweight Rail Cover

PAP M92-M85 Scope Mount Rail Only!

• Use this If your looking for another rail and already have the Scope Mount Kit.
• Use the Jig and Tools from the Kit you purchased in the past to mount this New Rail to a second gun.
• Made in the USA!

SBA3 5-Position Adjustable Brace & Adapter for PAP M92/85 AK Pistol

Everything you need to attach SBA3 Brace to your PAP M92/85 Pistol.

Kit includes:

RFT USA – Brace Adapter & Hardware to mount to PAP M92/85

• Drill Jig – for rear of Receiver
• 17/64 Cobalt Drill Bit – Made in the USA
• Brace Adapter
• Made from 6061 T6 Aluminum
• Finished with John Norrells Moly-Resin Semi Gloss Black
• Buffer Tube Castle Nut
• Bolt and 1/8 Allen Wrench
• Made in the USA!

SBA3 5-Positon Adjustable Arm Brace

• 5-position adjustable
• Includes 7075 mil-spec carbine receiver extension
• Integral, ambidextrous QD sling socket
• ATF compliant, US veteran designed and proudly made in the USA
• Product includes:  brace, mil-spec carbine receiver extension, adjustable nylon strap

Installation Video Below

■ CNC Machined High Quality “D” Slotted 1/8″ Thick
■ 1018 Cold Rolled Steel with a Flat Black Molly Resin Finish
■ Will not pull out from under your Pistol Grip.
■ No modifications necessary.
■ Not a piece of cheap Stamped Steel!

Proudly Made in the USA !

Don’t forget to visit our Sling Page….

The AGR-47 is the latest addition to our line of Pistol Grips featuring State-of-the Art Multi-Textured Rubber, enhancing your grip experience. Incorporated into its design, is the superior contour of its predecessor, adding even more comfort and proper ventilation needed in extreme heat and moist environments, giving you the edge you need in the field or at the range.

Advantages:
* Fiberglass Reinforced Polymer Composite with Muti-Textured Rubber Overmold Superior Coating
* Three Different Rubber Overmolded Style Textures; Rib Studded at Palm, Alligator Pattern for front Fingers and Moon Surface Textured Sides
* Multi Rubber Texture Provides Superior Comfort; Adds Appropriate Ventilation, Prevents Slip
and Reduces Sweaty Palms
* Finger grooves and backstrap shape for enhanced, more comfortable grip
* Extended Beavertail for Better Control, Allowing a Higher Firmer Hold
* Readily Accessible Storage Area with Securely Sealed Hinged Door

Compatibility:
AK-47/74, AKS-74U ‘Krinkov’, Galil Models

RFT USA – New AK Pistol SOB47 Combo Kit

***Fits All AK Pistols

Kit includes:

* SOB47 Arm Brace
* SOB47 Adjustable Spacer (use to adjust length of pull)
* Adjustable Spacer includes QD Swivel
* Unique design of the Adjustable Spacer keeps the Rubber Brace from Spinning on the tube.
* BlackHawk Storm Single Point Bungee Sling
* All Made in the USA!!!

• Heavy-duty Full Metal Construction to Meet Harshest Requirements

• Clever Dual Mounting – Picatinny Mount and Swivel Stud Mount

• Quick Detachable Lever Lock in Mounting Base to Fit on Any Picatinny/Weaver Rail

• Fully Adjustable Legs with 5 Extension Notches for Most Secured Extension Positions, Further Supported by Lockable Thumb Wheel for Fine and Precision Adjustment

• Foldable Arms with Robust External Spring Tension Control

• Unique Non-slip Rubberized Foot Pads for Any Terrain or Surface

– Great for a 2-Point Sling Set-up. Stabilizes Pistol when pushed into the Sling
– UTG Picatinny/Keymod Compatible Sling Swivel Adaptor for QD Sling Swivel Applications
– Precision Machined from Aircraft Grade Aluminum with Hard Anodizing Matte Back Finish
– Innovative Compact, Lightweight, Rugged Mounting Base with Max Strength Torx Drive Locking Screws for Picatinny/ Weaver Rail
– Detachable Keymod Module Compatible with Standard Keymod Slots on Keymod Rails for Flexible Sling Attachment without Additional Picatinny Conversion
– Accepts any Quick Detach Sling Swivel with 0.37 Diameter Swivel Stud
– Simple and Friendly Installation, No Gunsmith Required
– Includes Made in USA Keymod Nut and Tools for Keymod Slot Installation

**SLING & QD SWIVEL NOT INCLUDED**

Will fit AK47/74 and M92/85 Pistols and Rifles
■ Black Rubber Molded with Finger Grooves
■ Made in the USA!
■ 922(r) compliant

Everything you need to put a Red Dot on your M92/85 & Still See Your Iron Sights

PAP M92/85 Scope Mount Kit

• Easy Installation in 20 Minutes  – See our Video Page for Video Installation Instructions Kit 
• Kit includes Drill Template, Drill Bit, Thread Tap, Allen Wrench, 2 Machine Screws and Picatinny Rail Mount
• If you do not feel confident please have a Gunsmith install this mount…
• Made in the USA!

Bushnell TRS-25 Red Dot Sight

• 3 MOA Dot
• Waterproof/Fogproof to 10 feet
• 11-Position Brightness Control
• Extra-long Battery Life

UTG Super Slim Riser Mount

• 3/4″ Saddle Height
• 3 Slot
• .94 oz.
• CNC Machined Aluminum
• Now you can See your Iron Sight under your Red Dot

Great Price for a Quality Red Dot Set up on your M92/85!!!!!

New RFT USA Product- Adjustable Spacer for the S0B47 Arm Brace

– Adjust Spacer to move the SOB47 to fit the length of your arm and tighten 2 retaining screws
– Unique Design keeps the Rubber Arm Brace from Rotating on Tube
– Detachable QD Swivel
– Includes 1 QD Swivel
– Made from 6061 T6 Aluminum
– Finished with John Norrell’s Matte Black Molly-Resin
– Available in Right Hand
– Proudly Made in the USA!

New RFT USA Product- Adjustable Spacer for the S0B47 Arm Brace

– Adjust Spacer to move the SOB47 to fit the length of your arm and tighten 2 retaining screws
– Unique Design keeps the Rubber Arm Brace from Rotating on Tube
– Detachable QD Swivel
– Includes 1 QD Swivel
– Made from 6061 T6 Aluminum
– Finished with John Norrell’s Flat Dark Earth Molly-Resin
– Available in Right Hand
– Proudly Made in the USA!

***Arm Brace Not Included!!

The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts.

Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter’s hand high on the centerline of the bore, unlike conventional vertical fore-grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

Features

•Polymer three-piece design with an interchangeable finger shelf that allows for a flat “A1-style” surface or an “A2-style” finger nub
•Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of ~3″ recommended)
•All mounting hardware included
Specifications •AFG-2 – Angled Fore Grip
• Weight: 2.53 oz.

• Length: 4.70 in.

• Height, over rail: 1.94 in.

• Width, maximum: 1.37 in.

Color: Black

Made in U.S.A.

New UPDATED Product- Anti-Rotation Adjustable Spacer for the SB47 Arm Brace

– Adjust Spacer to fit the length of your arm and tighten 2 retaining screws
– Unique Design keeps the Rubber Arm Brace from Rotating on the Tube
– Detachable QD Swivel
– Includes 1 QD Swivel
– Made from 6061 T6 Aluminum
– Finished with John Norrell’s Matte Black Molly-Resin
– Available in Right Hand
– Proudly Made in the USA!

Optic Combo Pack
■RFT Scope Mount Kit
■Bushnell TRS-25 Red Dot
■UTG LS29 Green Laser uses CR123 Battery
■QD Riser for Red Dot
■QD Angle Mount for Laser
■2 Rubber Bands for holding Switch Pad to Grip

M92 Custom Machined UTG Pro Quad Rail – Made in the USA!

We start with the UTG Pro M70 Quad Rail and Machine it to fit the M92

The Quad Rail comes complete with a set of UTG Rail Covers.

Optics and Bolt on’s shown on Hand Guard are not Included!

MAGPUL MOE Grip Plus AK47/74 M92/85 PAP

•Drop-in upgrade for AK47/AK74 pistol grips*
•Fits both milled and stamped receivers, including those with grip reinforcement plates
•Rubber Over-Mold on reinforced polymer construction
•Textured for positive weapon control in all environments
•Comes with a basic cap, but accepts optional Storage Cores for customized gear stowage

Specifications:

•MOE AK Grip Plus
• Weight, w/ hardware: 2.86 oz.
• Width, max: 1.21″
• Length, max: 4.13″

Made in the USA!

NOTE: Due to the wide variety of tolerances of AK receivers, some custom fitting of the grip may be necessary.

The furniture is FDE (Flat Dark Earth) consisting of:

-SBTactical SOB47 Skeleton Arm Brace
-MagPul FDE Pistol Grip
-Custom Machined UTG PRO Quad Rail finished with Norrell’s Flat Dark Earth
-All Necessary Hardware for Installation
-All Made in the USA!

PAP M92/85 Scope Mount Kit with 2 Rails

Purchase this Kit if you intend to Install 2 Scope Mounts

Easy Installation- 20 Minutes
See our Video Page for Video Installation Instructions
Kit comes with Drill Template, Drill Bit, Thread Tap,
Allen Wrench, 4 Machine Screws and 2 Picatinny Rail Mounts
If you do not feel confident please have a Gunsmith install this mount…
Made in the USA….

New RFT USA Product- Adjustable Spacer for the SBM47 Arm Brace

– Adjust Spacer to move the SBM47 to fit the length of pull and tighten 2 retaining screws
– Unique Design keeps the Rubber Arm Brace from Rotating on Tube
– Detachable QD Swivel
– Includes 1 QD Swivel
– Made from 6061 T6 Aluminum
– Finished with John Norrell’s Matte Black Molly-Resin
– Available in Right Hand or Ambidextrous
– Proudly Made in the USA!